3d Printable Spongebob Squarepants
3d Printable Spongebob Squarepants model!
The single body STL and nulti-part split models are free (though donations are massively appreciated)
For a measly $2 (or more if you like), you can get the Fusion360 source file.
The multi part prints do share some pieces, so I've separated them in to the standing model (Main folder) and the seated parts (sub folder) which can be swapped out.
The Fusion 360 file contains the standing version and the seated version, both of which have been crafted with a 0.2mm clearance around holes where parts would be inserted. It's possible you may have to glue some bits, but I'm not sure.
I have also set up a user parameter in the file (Modify > User Parameters) called "clr". It currently contains a value of 0.2mm, but if you find it's too tight, or too loose for your printer, simply change that value to whatever suits, and it will automatically adjust all the clearances within both the standing and seated version.
The only exception to this, is the eyelashes. Due to the shape of the cut, they could not be adjusted automatically with the parameters.
(***Depending on the value you enter, this may generate errors, as there is only so much room that some parts can be adjusted****)
If you have any issues, please feel free to contact me, and I will be happy to help :)
I've also included completely uncut parts in a separate component within the Fusion file in case you wish to cut the model up differently. I had several suggestions on how it should be cut, but none of them were compatible with each other, so I decided to do it this way, and provide the files so you can do it differently if you wish. If you do decide to cut your own, and want to add clearances after, simply make your cut, then use Push/Pull (Q), select the faces inside the cut, and type "-clr" in to the dimension box, and it will adjust by whatever value you have set in the parameter :)
(The picture at the top is a render from within Fusion, and does have textures on the model)